diff --git a/Makefile b/Makefile index 4152a6b..35f2135 100644 --- a/Makefile +++ b/Makefile @@ -11,59 +11,78 @@ ifndef project_root else -clean: +clean_unsafe: + set -e sudo /usr/bin/env -i bash -c ". ./project_config.sh && ${dir_make}/clean.sh" +clean: + set -e + make disarm_chroot + make clean_unsafe + # same as clean, but retain logs purge_artifacts: + set -e ${dir_make}/purge_artifacts.sh # these need run in the following order: dirs: + set -e ${dir_make}/dirs.sh # installs the latest version of rex from master branch # will later be tied to a release tag install_rex: + set -e ${dir_make}/install_rex.sh # installs the versions designed for this run download_sources: + set -e ${dir_make}/download_sources.sh # "" download_patches: + set -e ${dir_make}/download_patches.sh # kicks off rex build_stage1: + set -e sudo /usr/bin/env -i bash -c ". ./project_config.sh && ${dir_make}/build_stage1.sh" # kicks off rex build_stage2: + set -e sudo /usr/bin/env -i bash -c ". ./project_config.sh && ${dir_make}/build_stage2.sh" arm_chroot: + set -e sudo /usr/bin/env -i bash -c ". ./project_config.sh && ${dir_make}/arm_chroot.sh" disarm_chroot: + set -e sudo /usr/bin/env -i bash -c ". ./project_config.sh && ${dir_make}/disarm_chroot.sh" # do not enter the chroot like this unless you have run arm_chroot. # build_stage2 does this automatically. enter_chroot: + set -e sudo /usr/bin/env -i bash -c ". ./project_config.sh && ${dir_make}/enter_chroot.sh" #embeds and kicks off rex from inside chroot build_stage3: + set -e sudo /usr/bin/env -i bash -c ". ./project_config.sh && ${dir_make}/build_stage3.sh" # offers to back up build_stage4backup: + set -e sudo /usr/bin/env -i bash -c ". ./project_config.sh && ${dir_make}/build_stage4backup.sh" build_stage4: + set -e sudo /usr/bin/env -i bash -c ". ./project_config.sh && ${dir_make}/build_stage4.sh" @@ -79,7 +98,21 @@ build_stage4: # optional: make build_stage4backup # make build_stage4 -all: disarm_chroot clean dirs install_rex download_patches download_sources build_stage1 build_stage2 build_stage3 build_stage4backup build_stage4 +.ONESHELL: +all: + set -e; \ + make disarm_chroot && \ + make clean && \ + make dirs && \ + make install_rex && \ + make download_patches && \ + make download_sources && \ + make build_stage1 && \ + make build_stage2 && \ + make build_stage3 && \ + make build_stage4backup && \ + make build_stage4 + # Remember, before you make clean or make purge_artifacts you MUST run # make disarm_chroot beforehand or you could cause irreversible damage diff --git a/configs/etc_ld.so.conf b/configs/etc_ld.so.conf new file mode 100644 index 0000000..20c9763 --- /dev/null +++ b/configs/etc_ld.so.conf @@ -0,0 +1,2 @@ +include /etc/ld.so.conf.d/*.conf + diff --git a/configs/etc_ld.so.conf.d_opt-lib.conf b/configs/etc_ld.so.conf.d_opt-lib.conf new file mode 100644 index 0000000..88745ea --- /dev/null +++ b/configs/etc_ld.so.conf.d_opt-lib.conf @@ -0,0 +1 @@ +/opt/lib diff --git a/configs/etc_ld.so.conf.d_usr-local-lib.conf b/configs/etc_ld.so.conf.d_usr-local-lib.conf new file mode 100644 index 0000000..e8e4bdc --- /dev/null +++ b/configs/etc_ld.so.conf.d_usr-local-lib.conf @@ -0,0 +1 @@ +/usr/local/lib diff --git a/configs/etc_nsswitch.conf b/configs/etc_nsswitch.conf new file mode 100644 index 0000000..067e63b --- /dev/null +++ b/configs/etc_nsswitch.conf @@ -0,0 +1,15 @@ +# Begin /etc/nsswitch.conf + +passwd: files +group: files +shadow: files + +hosts: files dns +networks: files + +protocols: files +services: files +ethers: files +rpc: files + +# End /etc/nsswitch.conf diff --git a/make.project/build_stage1.sh b/make.project/build_stage1.sh index d4a96a0..3a2b824 100755 --- a/make.project/build_stage1.sh +++ b/make.project/build_stage1.sh @@ -17,3 +17,4 @@ ${dir_localtools}/rex -v \ -p ${dir_rex}/x86_64/plans/stage1.plan retVal=$? +exit $retVal diff --git a/make.project/build_stage2.sh b/make.project/build_stage2.sh index e1ff5d5..f348fdd 100755 --- a/make.project/build_stage2.sh +++ b/make.project/build_stage2.sh @@ -17,3 +17,4 @@ ${dir_localtools}/rex -v \ -p ${dir_rex}/x86_64/plans/stage2.plan retVal=$? +exit $retVal diff --git a/make.project/build_stage3.sh b/make.project/build_stage3.sh index 1bc52b5..e3e916b 100755 --- a/make.project/build_stage3.sh +++ b/make.project/build_stage3.sh @@ -30,3 +30,4 @@ dir_rex=/rex_embedded/rex.project retVal=$? echo "Rex exited with error code '$retVal'." +exit $retVal diff --git a/make.project/build_stage4.sh b/make.project/build_stage4.sh index 4b0fdde..4c1f4a5 100755 --- a/make.project/build_stage4.sh +++ b/make.project/build_stage4.sh @@ -30,3 +30,4 @@ dir_rex=/rex_embedded/rex.project retVal=$? echo "Rex exited with error code '$retVal'." +exit $retVal diff --git a/make.project/build_stage4backup.sh b/make.project/build_stage4backup.sh index bd11bf1..ede025b 100755 --- a/make.project/build_stage4backup.sh +++ b/make.project/build_stage4backup.sh @@ -16,3 +16,4 @@ ${dir_localtools}/rex -v \ -p ${dir_rex}/x86_64/plans/stage4backup.plan retVal=$? +exit $retVal diff --git a/make.project/clean.sh b/make.project/clean.sh index 57ad5ea..fa8ccef 100755 --- a/make.project/clean.sh +++ b/make.project/clean.sh @@ -7,3 +7,4 @@ echo echo "Deleting ${dir_stage}" rm -Rf ${dir_logs} echo + diff --git a/make.project/download_patches.sh b/make.project/download_patches.sh index ade8207..f521a79 100755 --- a/make.project/download_patches.sh +++ b/make.project/download_patches.sh @@ -30,3 +30,4 @@ err=$? popd 1>/dev/null 2>/dev/null echo "Finished with exit code $err" +exit $err diff --git a/make.project/download_sources.sh b/make.project/download_sources.sh index 3566d09..7023ab7 100755 --- a/make.project/download_sources.sh +++ b/make.project/download_sources.sh @@ -28,3 +28,4 @@ err=$? popd 1>/dev/null 2>/dev/null echo "Finished with exit code $err" +exit $err diff --git a/make.project/enter_chroot.sh b/make.project/enter_chroot.sh index f634980..01be1b1 100755 --- a/make.project/enter_chroot.sh +++ b/make.project/enter_chroot.sh @@ -30,3 +30,4 @@ logprint() { PS1='\n(dark horse linux) [ \u @ \H ] << \w >>\n\n[- ' \ PATH=/usr/bin:/usr/sbin \ /bin/bash --login +exit $? diff --git a/rex.project/x86_64/components/stage1/glibc.bash b/rex.project/x86_64/components/stage1/glibc.bash index d2ff9b6..88c82b6 100755 --- a/rex.project/x86_64/components/stage1/glibc.bash +++ b/rex.project/x86_64/components/stage1/glibc.bash @@ -134,7 +134,7 @@ mode_build_pass1() { pushd ${TEMP_STAGE_DIR} assert_zero $? - echo "rootsbindir=/usr/sbin" > configparms + echo "rootsbindir=/usr/sbin" > ${T_SOURCE_DIR}/configparms assert_zero $? # fuck this part in particular! diff --git a/rex.project/x86_64/components/stage2/populate_ug.bash b/rex.project/x86_64/components/stage2/populate_ug.bash index 26eced3..5a6298a 100755 --- a/rex.project/x86_64/components/stage2/populate_ug.bash +++ b/rex.project/x86_64/components/stage2/populate_ug.bash @@ -4,7 +4,7 @@ # the path where logs are written to # note: LOGS_ROOT is sourced from environment -APPNAME="CHROOT PASSWD/GROUPS" +APPNAME="CHROOT PASSWD GROUPS" # ISO 8601 variation TIMESTAMP="$(date +%Y-%m-%d_%H:%M:%S)" diff --git a/rex.project/x86_64/components/stage3/clean-temp.bash b/rex.project/x86_64/components/stage3/clean-temp.bash index 3de9c9d..806b0be 100755 --- a/rex.project/x86_64/components/stage3/clean-temp.bash +++ b/rex.project/x86_64/components/stage3/clean-temp.bash @@ -29,7 +29,7 @@ rm -rvf /usr/share/{info,man,doc}/* assert_zero $? logprint "Removing temp libtool artifacts..." -find /usr/{lib,exec} -name \*.la -delete +find /usr/{lib,libexec} -name \*.la -delete assert_zero $? logprint "Cleaning out Temporary Cross-Compilation Toolchain" diff --git a/rex.project/x86_64/components/stage3/create_essential_files_links.bash b/rex.project/x86_64/components/stage3/create_essential_files_links.bash index 48e6ff1..a1af8a3 100755 --- a/rex.project/x86_64/components/stage3/create_essential_files_links.bash +++ b/rex.project/x86_64/components/stage3/create_essential_files_links.bash @@ -29,7 +29,7 @@ ln -sv /proc/self/mounts /etc/mtab assert_zero $? logprint "Staging /etc/hosts file" -cp -f ${dir_configs}/etc_hosts /etc/hosts +cp -f ${CONFIGS_DIR}/etc_hosts /etc/hosts assert_zero $? logprint "creating a temporary user and group for some tests later" diff --git a/rex.project/x86_64/components/stage3/getopt_tmp.bash b/rex.project/x86_64/components/stage3/getopt_tmp.bash new file mode 100755 index 0000000..93c632d --- /dev/null +++ b/rex.project/x86_64/components/stage3/getopt_tmp.bash @@ -0,0 +1,122 @@ +#!/bin/bash +# desc: +# stages, builds, installs + +# make variables persist in subprocesses for logging function +set -a + +# ---------------------------------------------------------------------- +# Configuration: +# ---------------------------------------------------------------------- +# the name of this application +APPNAME="util-linux" + +# the version of this application +VERSION="2.36.2" + +# ---------------------------------------------------------------------- +# Variables and functions sourced from Environment: +# ---------------------------------------------------------------------- +# assert_zero() +# Checks if $1 is 0. If non-0 value, halts the execution of the script. +# +# LOGS_ROOT +# The parent directory where logs from this project will go. +# +# TEMP_STAGE_DIR +# The parent directory of where source archives are extracted to. + +# register mode selections + +# the file to log to +LOGFILE="${APPNAME}.log" + +# ISO 8601 variation +TIMESTAMP="$(date +%Y-%m-%d_%H:%M:%S)" + +# the path where logs are written to +# note: LOGS_ROOT is sourced from environment +LOG_DIR="${LOGS_ROOT}/${APPNAME}-${TIMESTAMP}" + +# the path where the source will be located when complete +# note: TEMP_STAGE_DIR is sourced from environment +T_SOURCE_DIR="${TEMP_STAGE_DIR}/${APPNAME}" + +# print to stdout, print to log +logprint() { + mkdir -p "${LOG_DIR}" + echo "[$(date +%Y-%m-%d_%H:%M:%S)] [${APPNAME}] $1" \ + | tee -a "${LOG_DIR}/${LOGFILE}" +} + +# Tell the user we're alive... +logprint "Initializing the ${APPNAME} utility..." + +# when the stage mode is enabled, this will execute +stage() { + logprint "Starting stage of ${APPNAME}..." + + logprint "Removing any pre-existing staging for ${APPNAME}." + rm -Rf "${T_SOURCE_DIR}"* + + logprint "Extracting ${APPNAME}-${VERSION} source archive to ${TEMP_STAGE_DIR}" + tar xf "${SOURCES_DIR}/${APPNAME}-${VERSION}.tar."* -C "${TEMP_STAGE_DIR}" + assert_zero $? + + # conditionally rename if it needs it + stat "${T_SOURCE_DIR}-"* && mv "${T_SOURCE_DIR}-"* "${T_SOURCE_DIR}" + + logprint "Staging operation complete." +} + +# when the build_pass1 mode is enabled, this will execute +build() { + # patch, configure and build + logprint "Starting build of temporary getopt from ${APPNAME}..." + + logprint "Creating hwclock dir..." + mkdir -pv ${T_SYSROOT}/var/lib/hwclock + + logprint "Entering stage dir." + pushd "${T_SOURCE_DIR}" + assert_zero $? + + logprint "Configuring ${APPNAME}..." + ./configure ADJTIME_PATH=/var/lib/hwclock/adjtime \ + --docdir=/usr/share/doc/util-linux-2.36.2 \ + --disable-chfn-chsh \ + --disable-login \ + --disable-nologin \ + --disable-su \ + --disable-setpriv \ + --disable-runuser \ + --disable-pylibmount \ + --disable-static \ + --without-python \ + runstatedir=/run + assert_zero $? + + logprint "Compiling..." + make + assert_zero $? + + logprint "Build operation complete." +} + +install_getopt() { + logprint "Starting install of ${APPNAME}..." + pushd "${T_SOURCE_DIR}" + assert_zero $? + + logprint "Installing getopt..." + cp -v ./getopt ${T_SYSROOT}/usr/local/bin/getopt + assert_zero $? + + logprint "Install operation complete." +} + +stage +build +install_getopt +logprint "Execution of ${APPNAME} completed." + diff --git a/rex.project/x86_64/components/stage3/util-linux.bash b/rex.project/x86_64/components/stage3/util-linux.bash index ef74466..ae14419 100755 --- a/rex.project/x86_64/components/stage3/util-linux.bash +++ b/rex.project/x86_64/components/stage3/util-linux.bash @@ -40,7 +40,7 @@ ARGUMENT_LIST=( MODE_STAGE=false MODE_BUILD=false MODE_INSTALL=false -MODE_ALL=false +MODE_ALL=true MODE_HELP=false # the file to log to @@ -128,11 +128,6 @@ mode_build() { # patch, configure and build logprint "Starting build of ${APPNAME}..." - logprint "Removing pre-staged getopt utility..." - rm -f /usr/local/bin/getopt - assert_zero $? - - # silently fail, since it's already there from earlier mkdir -p /var/lib/hwclock assert_zero $? @@ -142,7 +137,7 @@ mode_build() { logprint "Configuring ${APPNAME}..." ./configure ADJTIME_PATH=/var/lib/hwclock/adjtime \ - --libdir==/usr/lib \ + --libdir=/usr/lib \ --docdir=/usr/share/doc/util-linux-${VERSION} \ --disable-chfn-chsh \ --disable-login \ @@ -171,6 +166,10 @@ mode_install() { logprint "Installing..." make install assert_zero $? + + logprint "Installing getopt..." + cp ./getopt /usr/bin/ + assert_zero $? logprint "Partial install operation complete." } diff --git a/rex.project/x86_64/components/stage4/bzip2.bash b/rex.project/x86_64/components/stage4/bzip2.bash new file mode 100755 index 0000000..e09dbd4 --- /dev/null +++ b/rex.project/x86_64/components/stage4/bzip2.bash @@ -0,0 +1,240 @@ +#!/bin/bash +# desc: +# stages, builds, installs + +# make variables persist in subprocesses for logging function +set -a + +# ---------------------------------------------------------------------- +# Configuration: +# ---------------------------------------------------------------------- +# the name of this application +APPNAME="bzip2" + +# the version of this application +VERSION="1.0.8" + +# ---------------------------------------------------------------------- +# Variables and functions sourced from Environment: +# ---------------------------------------------------------------------- +# assert_zero() +# Checks if $1 is 0. If non-0 value, halts the execution of the script. +# +# LOGS_ROOT +# The parent directory where logs from this project will go. +# +# TEMP_STAGE_DIR +# The parent directory of where source archives are extracted to. + +# register mode selections +ARGUMENT_LIST=( + "stage" + "build" + "install" + "all" + "help" +) + +# modes to associate with switches +# assumes you want nothing done unless you ask for it. +MODE_STAGE=false +MODE_BUILD=false +MODE_INSTALL=false +MODE_ALL=false +MODE_HELP=false + +# the file to log to +LOGFILE="${APPNAME}.log" + +# ISO 8601 variation +TIMESTAMP="$(date +%Y-%m-%d_%H:%M:%S)" + +# the path where logs are written to +# note: LOGS_ROOT is sourced from environment +LOG_DIR="${LOGS_ROOT}/${APPNAME}-${TIMESTAMP}" + +# the path where the source will be located when complete +# note: TEMP_STAGE_DIR is sourced from environment +T_SOURCE_DIR="${TEMP_STAGE_DIR}/${APPNAME}" + +# read defined arguments +opts=$(getopt \ + --longoptions "$(printf "%s," "${ARGUMENT_LIST[@]}")" \ + --name "$APPNAME" \ + --options "" \ + -- "$@" +) + +# process supplied arguments into flags that enable execution modes +eval set --$opts +while [[ $# -gt 0 ]]; do + case "$1" in + --stage) + MODE_STAGE=true + shift 1 + ;; + --build) + MODE_BUILD=true + shift 1 + ;; + --install) + MODE_INSTALL=true + shift 1 + ;; + --all) + MODE_ALL=true + shift 1 + ;; + --help) + MODE_HELP=true + shift 1 + ;; + *) + break + ;; + esac +done + +# print to stdout, print to log +logprint() { + mkdir -p "${LOG_DIR}" + echo "[$(date +%Y-%m-%d_%H:%M:%S)] [${APPNAME}] $1" \ + | tee -a "${LOG_DIR}/${LOGFILE}" +} + +# Tell the user we're alive... +logprint "Initializing the ${APPNAME} utility..." + +# when the stage mode is enabled, this will execute +mode_stage() { + logprint "Starting stage of ${APPNAME}..." + + logprint "Removing any pre-existing staging for ${APPNAME}." + rm -Rf "${T_SOURCE_DIR}"* + + logprint "Extracting ${APPNAME}-${VERSION} source archive to ${TEMP_STAGE_DIR}" + tar xf "${SOURCES_DIR}/${APPNAME}-${VERSION}.tar."* -C "${TEMP_STAGE_DIR}" + assert_zero $? + + # conditionally rename if it needs it + stat "${T_SOURCE_DIR}-"* && mv "${T_SOURCE_DIR}-"* "${T_SOURCE_DIR}" + + logprint "Staging operation complete." +} + +# when the build_pass1 mode is enabled, this will execute +mode_build() { + + # patch, configure and build + logprint "Starting build of ${APPNAME}..." + + logprint "Entering stage dir." + pushd "${T_SOURCE_DIR}" + assert_zero $? + + logprint "Applying documentation install patch..." + patch -Np1 -i ${PATCHES_DIR}/bzip2-1.0.8-install_docs-1.patch + assert_zero $? + + # create this + logprint "Applying relative symbolic links patch..." + patch -Np1 -i ${PATCHES_DIR}/bzip2-1.0.8-relative_links.patch + assert_zero $? + + # create this + logprint "Applying man page path fix patch..." + patch -Np1 -i ${PATCHES_DIR}/bzip2-1.0.8-man_path.patch + assert_zero $? + + logprint "Compiling..." + make -f Makefile-libbz2_so + assert_zero $? + + make clean + assert_zero $? + + make + assert_zero $? + + logprint "Build operation complete." +} + +mode_install() { + logprint "Starting install of ${APPNAME}..." + pushd "${T_SOURCE_DIR}" + assert_zero $? + + logprint "Installing..." + make PREFIX=/usr install + assert_zero $? + + logprint "Cleaning up..." + cp -av libbz2.so.* /usr/lib/ + assert_zero $? + + ln -sv libbz2.so.${VERSION} /usr/lib/libbz2.so + assert_zero $? + + cp -v bzip2-shared /bin/bzip2 + assert_zero $? + + for i in /usr/bin/{bzcat,bunzip2}; do + ln -sfv bzip2 $i + assert_zero $? + done + + rm -fv /usr/lib/libbz2.a + assert_zero $? + + logprint "Install operation complete." +} + + +mode_help() { + echo "${APPNAME} [ --stage ] [ --build ] [ --install ] [ --all ] [ --help ]" + exit 1 +} + +if [ "$MODE_ALL" = "true" ]; then + MODE_STAGE=true + MODE_BUILD=true + MODE_INSTALL=true +fi + +# if no options were selected, then show help and exit +if \ + [ "$MODE_HELP" != "true" ] && \ + [ "$MODE_STAGE" != "true" ] && \ + [ "$MODE_BUILD" != "true" ] && \ + [ "$MODE_INSTALL" != "true" ] +then + logprint "No option selected during execution." + mode_help +fi + +# if help was supplied at all, show help and exit +if [ "$MODE_HELP" = "true" ]; then + logprint "Help option selected. Printing options and exiting." + mode_help +fi + +if [ "$MODE_STAGE" = "true" ]; then + logprint "Staging option selected." + mode_stage + assert_zero $? +fi + +if [ "$MODE_BUILD" = "true" ]; then + logprint "Build of ${APPNAME} selected." + mode_build + assert_zero $? +fi + +if [ "$MODE_INSTALL" = "true" ]; then + logprint "Install of ${APPNAME} selected." + mode_install + assert_zero $? +fi + +logprint "Execution of ${APPNAME} completed." + diff --git a/rex.project/x86_64/components/stage4/glibc.bash b/rex.project/x86_64/components/stage4/glibc.bash new file mode 100755 index 0000000..8dcc79c --- /dev/null +++ b/rex.project/x86_64/components/stage4/glibc.bash @@ -0,0 +1,315 @@ +#!/bin/bash +# desc: +# stages, builds, installs + +# make variables persist in subprocesses for logging function +set -a + +# ---------------------------------------------------------------------- +# Configuration: +# ---------------------------------------------------------------------- +# the name of this application +APPNAME="glibc" + +# the version of this application +VERSION="2.37" + +# ---------------------------------------------------------------------- +# Variables and functions sourced from Environment: +# ---------------------------------------------------------------------- +# assert_zero() +# Checks if $1 is 0. If non-0 value, halts the execution of the script. +# +# LOGS_ROOT +# The parent directory where logs from this project will go. +# +# TEMP_STAGE_DIR +# The parent directory of where source archives are extracted to. + +# register mode selections +ARGUMENT_LIST=( + "stage" + "build" + "install" + "all" + "help" +) + +# modes to associate with switches +# assumes you want nothing done unless you ask for it. +MODE_STAGE=false +MODE_BUILD=false +MODE_INSTALL=false +MODE_ALL=false +MODE_HELP=false + +# the file to log to +LOGFILE="${APPNAME}.log" + +# ISO 8601 variation +TIMESTAMP="$(date +%Y-%m-%d_%H:%M:%S)" + +# the path where logs are written to +# note: LOGS_ROOT is sourced from environment +LOG_DIR="${LOGS_ROOT}/${APPNAME}-${TIMESTAMP}" + +# the path where the source will be located when complete +# note: TEMP_STAGE_DIR is sourced from environment +T_SOURCE_DIR="${TEMP_STAGE_DIR}/${APPNAME}" + +# read defined arguments +opts=$(getopt \ + --longoptions "$(printf "%s," "${ARGUMENT_LIST[@]}")" \ + --name "$APPNAME" \ + --options "" \ + -- "$@" +) + +# process supplied arguments into flags that enable execution modes +eval set --$opts +while [[ $# -gt 0 ]]; do + case "$1" in + --stage) + MODE_STAGE=true + shift 1 + ;; + --build) + MODE_BUILD=true + shift 1 + ;; + --install) + MODE_INSTALL=true + shift 1 + ;; + --all) + MODE_ALL=true + shift 1 + ;; + --help) + MODE_HELP=true + shift 1 + ;; + *) + break + ;; + esac +done + +# print to stdout, print to log +logprint() { + mkdir -p "${LOG_DIR}" + echo "[$(date +%Y-%m-%d_%H:%M:%S)] [${APPNAME}] $1" \ + | tee -a "${LOG_DIR}/${LOGFILE}" +} + +# Tell the user we're alive... +logprint "Initializing the ${APPNAME} utility..." + +# when the stage mode is enabled, this will execute +mode_stage() { + logprint "Starting stage of ${APPNAME}..." + + logprint "Removing any pre-existing staging for ${APPNAME}." + rm -Rf "${T_SOURCE_DIR}"* + + logprint "Extracting ${APPNAME}-${VERSION} source archive to ${TEMP_STAGE_DIR}" + tar xf "${SOURCES_DIR}/${APPNAME}-${VERSION}.tar."* -C "${TEMP_STAGE_DIR}" + assert_zero $? + + # conditionally rename if it needs it + stat "${T_SOURCE_DIR}-"* && mv "${T_SOURCE_DIR}-"* "${T_SOURCE_DIR}" + + logprint "Staging operation complete." +} + +# when the build_pass1 mode is enabled, this will execute +mode_build() { + + # patch, configure and build + logprint "Starting build of ${APPNAME}/pass1 of stage2..." + + logprint "Entering stage dir." + pushd "${T_SOURCE_DIR}" + assert_zero $? + + logprint "Applying patches..." + patch -Np1 -i ${PATCHES_DIR}/glibc-${VERSION}-fhs-1.patch + assert_zero $? + + # TODO make this a patch + sed '/width -=/s/workend - string/number_length/' -i stdio-common/vfprintf-process-arg.c + assert_zero $? + + logprint "Entering temp build dir..." + mkdir -p build + pushd build + assert_zero $? + + # TODO make this a patch + echo "rootsbindir=/usr/sbin" > ${T_SOURCE_DIR}/build/configparms + assert_zero $? + + logprint "Configuring ${APPNAME}..." + ../configure \ + --prefix=/usr \ + --disable-werror \ + --enable-kernel=3.2 \ + --enable-stack-protector=strong \ + --with-headers=/usr/include \ + libc_cv_slibdir=/usr/lib + assert_zero $? + + logprint "Compiling..." + make + assert_zero $? + + logprint "Testing build..." + make check + + logprint "Build operation complete." +} + +mode_install() { + logprint "Starting install of ${APPNAME}..." + pushd "${T_SOURCE_DIR}/build" + assert_zero $? + + logprint "Creating empty ld.so.conf" + touch /etc/ld.so.conf + assert_zero $? + + # TODO make this a patch + logprint "Patching the makefile... :/" + sed '/test-installation/s@$(PERL)@echo not running@' -i ../Makefile + assert_zero $? + + logprint "Installing..." + make install + assert_zero $? + + logprint "Doing the ridiculous glibc post-install work..." + + logprint "Fixing hardcoded path to the executable loader in the ldd script" + sed '/RTLDLIST=/s@/usr@@g' -i /usr/bin/ldd + assert_zero $? + + logprint "Installing /etc/nscd.conf" + cp -v ../nscd/nscd.conf /etc/nscd.conf + assert_zero $? + + logprint "Creating /var/cache/nscd" + mkdir -pv /var/cache/nscd + + logprint "Installing systemD support for nscd..." + install -v -Dm644 ../nscd/nscd.tmpfiles /usr/lib/tmpfiles.d/nscd.conf + assert_zero $? + + install -v -Dm644 ../nscd/nscd.service /usr/lib/systemd/system/nscd.service + assert_zero $? + + mkdir -pv /usr/lib/locale + assert_zero $? + + logprint "Installing locale definitions..." + make localedata/install-locales + assert_zero $? + + localedef -i POSIX -f UTF-8 C.UTF-8 2> /dev/null || true + assert_zero $? + + logprint "Installing /etc/nsswitch.conf" + cp -vf ${CONFIGS_DIR}/etc_nsswitch.conf /etc/nsswitch.conf + assert_zero $? + + logprint "Installing tzdata which glibc should totally be remotely related to (not)..." + mkdir -p tzdata + pushd tzdata + assert_zero $? + + tar -xvf ${SOURCES_DIR}/tzdata2022g.tar.gz -C ./ + ZI=/usr/share/zoneinfo + mkdir -p ${ZI}/{posix,right} + for TZ in etcetera southamerica northamerica europe africa antarctica asia australasia backward; do + zic -L /dev/null -d ${ZI} ${TZ} + zic -L /dev/null -d ${ZI}/posix ${TZ} + zic -L leapseconds -d ${ZI}/right ${TZ} + done + + cp -v zone.tab zone1970.tab iso3166.tab ${ZI} + assert_zero $? + + # this will likely become part of the installer for TZ selection + # NOTE: really should default to UTC until set by user at that point + zic -d ${ZI} -p America/New_York + assert_zero $? + unset ${ZI} + + logprint "Setting timezone to UTC..." + ln -sfv /usr/share/zoneinfo/UTC /etc/localtime + assert_zero $? + + logprint "Installing /etc/ld.so.conf" + cp -vf ${CONFIGS_DIR}/etc_ld.so.conf /etc/ld.so.conf + assert_zero $? + + mkdir -pv /etc/ld.so.conf.d + asset_zero $? + + cp -vf ${CONFIGS_DIR}/etc_ld.so.conf.d_usr-local-lib.conf /etc/ld.so.conf.d/user-local-lib.conf + assert_zero $? + + cp -vf ${CONFIGS_DIR}/etc_ld.so.conf.d_opt-lib.conf /etc/ld.so.conf.d/opt-lib.conf + assert_zero $? + + logprint "Glibc install operation complete. Jesus-- we think?" +} + + +mode_help() { + echo "${APPNAME} [ --stage ] [ --build ] [ --install ] [ --all ] [ --help ]" + exit 1 +} + +if [ "$MODE_ALL" = "true" ]; then + MODE_STAGE=true + MODE_BUILD=true + MODE_INSTALL=true +fi + +# if no options were selected, then show help and exit +if \ + [ "$MODE_HELP" != "true" ] && \ + [ "$MODE_STAGE" != "true" ] && \ + [ "$MODE_BUILD" != "true" ] && \ + [ "$MODE_INSTALL" != "true" ] +then + logprint "No option selected during execution." + mode_help +fi + +# if help was supplied at all, show help and exit +if [ "$MODE_HELP" = "true" ]; then + logprint "Help option selected. Printing options and exiting." + mode_help +fi + +if [ "$MODE_STAGE" = "true" ]; then + logprint "Staging option selected." + mode_stage + assert_zero $? +fi + +if [ "$MODE_BUILD" = "true" ]; then + logprint "Build of ${APPNAME} selected." + mode_build + assert_zero $? +fi + +if [ "$MODE_INSTALL" = "true" ]; then + logprint "Install of ${APPNAME} selected." + mode_install + assert_zero $? +fi + +logprint "Execution of ${APPNAME} completed." + diff --git a/rex.project/x86_64/components/stage4/iana-etc.bash b/rex.project/x86_64/components/stage4/iana-etc.bash new file mode 100755 index 0000000..60f52a2 --- /dev/null +++ b/rex.project/x86_64/components/stage4/iana-etc.bash @@ -0,0 +1,194 @@ +#!/bin/bash +# desc: +# stages, builds, installs + +# make variables persist in subprocesses for logging function +set -a + +# ---------------------------------------------------------------------- +# Configuration: +# ---------------------------------------------------------------------- +# the name of this application +APPNAME="iana-etc" + +# the version of this application +VERSION="20230202" + +# ---------------------------------------------------------------------- +# Variables and functions sourced from Environment: +# ---------------------------------------------------------------------- +# assert_zero() +# Checks if $1 is 0. If non-0 value, halts the execution of the script. +# +# LOGS_ROOT +# The parent directory where logs from this project will go. +# +# TEMP_STAGE_DIR +# The parent directory of where source archives are extracted to. + +# register mode selections +ARGUMENT_LIST=( + "stage" + "build" + "install" + "all" + "help" +) + +# modes to associate with switches +# assumes you want nothing done unless you ask for it. +MODE_STAGE=false +MODE_BUILD=false +MODE_INSTALL=false +MODE_ALL=false +MODE_HELP=false + +# the file to log to +LOGFILE="${APPNAME}.log" + +# ISO 8601 variation +TIMESTAMP="$(date +%Y-%m-%d_%H:%M:%S)" + +# the path where logs are written to +# note: LOGS_ROOT is sourced from environment +LOG_DIR="${LOGS_ROOT}/${APPNAME}-${TIMESTAMP}" + +# the path where the source will be located when complete +# note: TEMP_STAGE_DIR is sourced from environment +T_SOURCE_DIR="${TEMP_STAGE_DIR}/${APPNAME}" + +# read defined arguments +opts=$(getopt \ + --longoptions "$(printf "%s," "${ARGUMENT_LIST[@]}")" \ + --name "$APPNAME" \ + --options "" \ + -- "$@" +) + +# process supplied arguments into flags that enable execution modes +eval set --$opts +while [[ $# -gt 0 ]]; do + case "$1" in + --stage) + MODE_STAGE=true + shift 1 + ;; + --build) + MODE_BUILD=true + shift 1 + ;; + --install) + MODE_INSTALL=true + shift 1 + ;; + --all) + MODE_ALL=true + shift 1 + ;; + --help) + MODE_HELP=true + shift 1 + ;; + *) + break + ;; + esac +done + +# print to stdout, print to log +logprint() { + mkdir -p "${LOG_DIR}" + echo "[$(date +%Y-%m-%d_%H:%M:%S)] [${APPNAME}] $1" \ + | tee -a "${LOG_DIR}/${LOGFILE}" +} + +# Tell the user we're alive... +logprint "Initializing the ${APPNAME} utility..." + +# when the stage mode is enabled, this will execute +mode_stage() { + logprint "Starting stage of ${APPNAME}..." + + logprint "Removing any pre-existing staging for ${APPNAME}." + rm -Rf "${T_SOURCE_DIR}"* + + logprint "Extracting ${APPNAME}-${VERSION} source archive to ${TEMP_STAGE_DIR}" + tar xf "${SOURCES_DIR}/${APPNAME}-${VERSION}.tar."* -C "${TEMP_STAGE_DIR}" + assert_zero $? + + # conditionally rename if it needs it + stat "${T_SOURCE_DIR}-"* && mv "${T_SOURCE_DIR}-"* "${T_SOURCE_DIR}" + + logprint "Staging operation complete." +} + +# when the build_pass1 mode is enabled, this will execute +mode_build() { + + logprint "Nothing to build." +} + +mode_install() { + logprint "Starting install of ${APPNAME}..." + pushd "${T_SOURCE_DIR}" + assert_zero $? + + logprint "Installing..." + cp -v services /etc + assert_zero $? + + cp -v protocols /etc + assert_zero $? + + logprint "install operation complete." +} + + +mode_help() { + echo "${APPNAME} [ --stage ] [ --build ] [ --install ] [ --all ] [ --help ]" + exit 1 +} + +if [ "$MODE_ALL" = "true" ]; then + MODE_STAGE=true + MODE_BUILD=true + MODE_INSTALL=true +fi + +# if no options were selected, then show help and exit +if \ + [ "$MODE_HELP" != "true" ] && \ + [ "$MODE_STAGE" != "true" ] && \ + [ "$MODE_BUILD" != "true" ] && \ + [ "$MODE_INSTALL" != "true" ] +then + logprint "No option selected during execution." + mode_help +fi + +# if help was supplied at all, show help and exit +if [ "$MODE_HELP" = "true" ]; then + logprint "Help option selected. Printing options and exiting." + mode_help +fi + +if [ "$MODE_STAGE" = "true" ]; then + logprint "Staging option selected." + mode_stage + assert_zero $? +fi + +if [ "$MODE_BUILD" = "true" ]; then + logprint "Build of ${APPNAME} selected." + mode_build + assert_zero $? +fi + +if [ "$MODE_INSTALL" = "true" ]; then + logprint "Install of ${APPNAME} selected." + mode_install + assert_zero $? +fi + +logprint "Execution of ${APPNAME} completed." + diff --git a/rex.project/x86_64/components/stage4/man-pages.bash b/rex.project/x86_64/components/stage4/man-pages.bash new file mode 100755 index 0000000..42ca669 --- /dev/null +++ b/rex.project/x86_64/components/stage4/man-pages.bash @@ -0,0 +1,191 @@ +#!/bin/bash +# desc: +# stages, builds, installs + +# make variables persist in subprocesses for logging function +set -a + +# ---------------------------------------------------------------------- +# Configuration: +# ---------------------------------------------------------------------- +# the name of this application +APPNAME="man-pages" + +# the version of this application +VERSION="6.03" + +# ---------------------------------------------------------------------- +# Variables and functions sourced from Environment: +# ---------------------------------------------------------------------- +# assert_zero() +# Checks if $1 is 0. If non-0 value, halts the execution of the script. +# +# LOGS_ROOT +# The parent directory where logs from this project will go. +# +# TEMP_STAGE_DIR +# The parent directory of where source archives are extracted to. + +# register mode selections +ARGUMENT_LIST=( + "stage" + "build" + "install" + "all" + "help" +) + +# modes to associate with switches +# assumes you want nothing done unless you ask for it. +MODE_STAGE=false +MODE_BUILD=false +MODE_INSTALL=false +MODE_ALL=false +MODE_HELP=false + +# the file to log to +LOGFILE="${APPNAME}.log" + +# ISO 8601 variation +TIMESTAMP="$(date +%Y-%m-%d_%H:%M:%S)" + +# the path where logs are written to +# note: LOGS_ROOT is sourced from environment +LOG_DIR="${LOGS_ROOT}/${APPNAME}-${TIMESTAMP}" + +# the path where the source will be located when complete +# note: TEMP_STAGE_DIR is sourced from environment +T_SOURCE_DIR="${TEMP_STAGE_DIR}/${APPNAME}" + +# read defined arguments +opts=$(getopt \ + --longoptions "$(printf "%s," "${ARGUMENT_LIST[@]}")" \ + --name "$APPNAME" \ + --options "" \ + -- "$@" +) + +# process supplied arguments into flags that enable execution modes +eval set --$opts +while [[ $# -gt 0 ]]; do + case "$1" in + --stage) + MODE_STAGE=true + shift 1 + ;; + --build) + MODE_BUILD=true + shift 1 + ;; + --install) + MODE_INSTALL=true + shift 1 + ;; + --all) + MODE_ALL=true + shift 1 + ;; + --help) + MODE_HELP=true + shift 1 + ;; + *) + break + ;; + esac +done + +# print to stdout, print to log +logprint() { + mkdir -p "${LOG_DIR}" + echo "[$(date +%Y-%m-%d_%H:%M:%S)] [${APPNAME}] $1" \ + | tee -a "${LOG_DIR}/${LOGFILE}" +} + +# Tell the user we're alive... +logprint "Initializing the ${APPNAME} utility..." + +# when the stage mode is enabled, this will execute +mode_stage() { + logprint "Starting stage of ${APPNAME}..." + + logprint "Removing any pre-existing staging for ${APPNAME}." + rm -Rf "${T_SOURCE_DIR}"* + + logprint "Extracting ${APPNAME}-${VERSION} source archive to ${TEMP_STAGE_DIR}" + tar xf "${SOURCES_DIR}/${APPNAME}-${VERSION}.tar."* -C "${TEMP_STAGE_DIR}" + assert_zero $? + + # conditionally rename if it needs it + stat "${T_SOURCE_DIR}-"* && mv "${T_SOURCE_DIR}-"* "${T_SOURCE_DIR}" + + logprint "Staging operation complete." +} + +# when the build_pass1 mode is enabled, this will execute +mode_build() { + + logprint "Nothing to build." +} + +mode_install() { + logprint "Starting install of ${APPNAME}..." + pushd "${T_SOURCE_DIR}" + assert_zero $? + + logprint "Installing..." + make prefix=/usr install + assert_zero $? + + logprint "install operation complete." +} + + +mode_help() { + echo "${APPNAME} [ --stage ] [ --build ] [ --install ] [ --all ] [ --help ]" + exit 1 +} + +if [ "$MODE_ALL" = "true" ]; then + MODE_STAGE=true + MODE_BUILD=true + MODE_INSTALL=true +fi + +# if no options were selected, then show help and exit +if \ + [ "$MODE_HELP" != "true" ] && \ + [ "$MODE_STAGE" != "true" ] && \ + [ "$MODE_BUILD" != "true" ] && \ + [ "$MODE_INSTALL" != "true" ] +then + logprint "No option selected during execution." + mode_help +fi + +# if help was supplied at all, show help and exit +if [ "$MODE_HELP" = "true" ]; then + logprint "Help option selected. Printing options and exiting." + mode_help +fi + +if [ "$MODE_STAGE" = "true" ]; then + logprint "Staging option selected." + mode_stage + assert_zero $? +fi + +if [ "$MODE_BUILD" = "true" ]; then + logprint "Build of ${APPNAME} selected." + mode_build + assert_zero $? +fi + +if [ "$MODE_INSTALL" = "true" ]; then + logprint "Install of ${APPNAME} selected." + mode_install + assert_zero $? +fi + +logprint "Execution of ${APPNAME} completed." + diff --git a/rex.project/x86_64/components/stage4/welcome.bash b/rex.project/x86_64/components/stage4/welcome.bash new file mode 100755 index 0000000..9f1902b --- /dev/null +++ b/rex.project/x86_64/components/stage4/welcome.bash @@ -0,0 +1,48 @@ +HORSE=$(cat <<'EOH' +⠀⠀⠀⠀⠀⠀⢀⠀⠀⣄⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀ +⠀⠀⠀⠀⠀⠀⠘⣦⡀⠘⣆⠈⠛⠻⣗⠶⣶⣤⣄⡀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀ +⠀⠀⠀⠀⠀⠀⠀⠈⣿⠀⠈⠳⠄⠀⠈⠙⠶⣍⡻⢿⣷⣦⣀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀ +⠀⠀⠀⠀⠀⠀⠀⣰⣿⣧⠀⠀⠀⠀⠀⠀⠀⠈⠻⣮⡹⣿⣿⣷⣦⣄⣀⠀⠀⢀⣸⠃⠀⣆⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀ +⠀⠀⠀⠀⠀⠀⢠⣿⡿⠋⠀⠀⠀⠀⠀⠀⠀⠀⠀⠈⠻⣮⢿⣿⣿⣿⣿⣿⣿⣿⠟⠀⢰⣿⣦⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀ +⠀⠀⠀⠀⠀⢀⣾⣿⠀⠀⠀⠀⠀⠀⠀⣷⠀⢷⠀⠀⠀⠙⢷⣿⣿⣿⣿⣟⣋⣀⣤⣴⣿⣿⣿⣧⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀ +⠀⠀⠀⠀⢀⣼⢿⣿⡀⠀⠀⢀⣀⣴⣾⡟⠀⠈⣇⠀⠀⠀⠈⢻⡙⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⡄⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀ +⠀⠀⠀⠀⣼⡏⠸⣿⣿⣶⣾⣿⡿⠟⠋⠀⠀⠀⢹⡆⠀⠀⠀⠀⠹⡽⣿⣿⣿⣿⣿⣿⣿⣿⡿⠛⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀ +⠀⠀⠀⣰⣿⠀⠀⠀⣀⡿⠛⠉⠀⠀⢿⠀⠀⠀⠘⣿⡄⠀⠀⠀⠀⠑⢹⣿⣿⣿⣿⣿⣿⣿⣿⠇⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀ +⠀⠀⠀⣿⣿⣷⣶⣾⠏⠀⠀⠀⠀⠀⠘⣇⠀⠀⠀⢻⡇⠀⠀⠀⠀⠀⠀⠹⣿⣿⣿⣿⣿⡿⠃⠀⣠⡇⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀ +⠀⠀⠀⠈⠙⠿⠿⠋⠀⠀⠀⠀⠀⠀⠀⣿⠀⠀⠀⢸⣷⠀⠀⠀⠀⠀⢀⠀⠹⣿⣿⣿⣿⣷⣶⣿⠟⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀ +⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⢀⣿⠀⠀⠀⢸⣿⠀⠀⠀⠀⢀⡞⠀⠀⠈⠛⠻⠿⠿⠯⠥⠤⢄⣀⣀⢀⣀⡀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀ +⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⣸⣿⠀⠀⠀⢸⡇⠀⠀⠀⢀⡼⠃⠀⠀⠀⠀⠀⣄⠀⠀⠀⠀⠀⠀⠈⠙⠂⠙⠳⢤⣄⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀ +⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⢀⣿⠇⠀⠀⠀⡾⠁⠀⠀⣠⡿⠃⠀⠀⠀⠀⠀⠀⠸⣇⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠙⢿⣦⡀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀ +⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⣼⣿⠀⠀⠀⡸⠃⠀⢀⣴⠟⠁⠀⠀⠀⠀⠀⠀⠀⠀⣿⡆⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠙⣷⣶⣶⣦⣤⣀⡀⠀⠀⠀⠀⠀⠀ +⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⢰⣿⠇⠀⠀⠀⠃⢀⣴⠟⠁⠀⠀⠀⠀⠀⠀⠀⠀⠀⢠⣿⠃⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠘⣿⣿⣿⣿⣿⣿⣿⣶⣤⡀⠀⠀ +⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⢠⣿⠏⠀⠀⠀⠀⣰⡟⠁⠀⠀⠀ ⠀⠀⠀⣼⡏⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⢸⣧⠙⠻⣿⣿⣿⣿⣿⣿⣦⡀ +⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⣼⡏⠀⠀⢀⡖⢰⠏⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⣰⡟⠁⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⢠⠟⠀⠀⠀⢸⣿⠀⠀⠈⢿⣿⣿⣿⣿⣿⡿ +⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⢿⡇⠀⠀⣼⠁⠼⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⣴⠟⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⢀⡴⠋⠀⠀⠀⠀⣼⡇⠀⠀⣠⣾⣿⣿⣿⣿⠟⠀ +⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⡄⠘⣇⠀⠀⢻⡄⢠⡄⠀⠀⠀⠀⠀⠀⠀⠀⢀⣤⡴⠃⠀⠀⠀⠀⠀⠀⠀⠀⠀⢀⣴⠟⠁⠀⠀⠀⢀⣼⠏⠀⣠⣾⣿⣿⡿⣿⡿⠁⠀⠀ +⠀⠀⠀⠀⠀⠀⠀⠀⢀⣾⠁⠀⠘⠂⠀⠀⢳⠀⢳⡀⠀⠀⠀⠀⠀⠀⢀⡼⠁⠀⠀⠀⠀⠀⠀⠀⠀⣀⣤⣾⣿⠃⠀⠀⠀⠀⣠⣾⠃⣠⣾⣿⣿⠿⠋⢰⡟⠀⠀⠀⠀ +⠀⠀⠀⠀⠀⠀⠀⢠⣿⠃⠀⠀⠀⢀⣀⡴⠞⠙⠲⣷⡄⠀⠀⠀⠀⢠⡾⠁⠀⠀⠀⢀⣀⣠⣤⣶⠿⠟⠋⠀⡾⠀⠀⠀⢀⣴⠟⠁⢠⡟⢱⡿⠃⠀⠀⠸⣇⡀⠀⠀⠀ +⠀⠀⠀⠀⠀⢀⡴⠟⠁⠀⣀⡤⠖⠋⠁⠀⠀⠀⠀⣸⠇⠀⠀⠀⣤⠟⠑⠋⠉⣿⠋⠉⠉⠉⠁⣠⠞⠀⠀⠀⡇⠀⠀⢠⡿⠋⠀⠀⠈⠁⡿⠀⠀⠀⠀⠀⠀⠁⠀⠀⠀ +⠀⠀⠀⢀⣾⣏⣤⣶⡾⠛⠉⠀⠀⠀⠀⠀⠀⢀⡼⠃⠀⠀⣠⠞⠁⠀⠀⠀⠀⣿⠀⠀⠀⢀⡼⠃⠀⠀⠀⢸⠇⠀⣰⠟⠀⠀⠀⠀⠀⠐⠃⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀ +⠀⠀⢀⣿⣿⡿⠛⠁⠀⠀⠀⠀⠀⠀⠀⢀⣴⠏⠀⠀⣠⠞⠁⠀⠀⠀⠀⠀⠀⣿⠀⠀⢀⡾⠃⠀⠀⠀⢀⡞⠀⣼⠃⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀ +⠀⠀⣼⣿⡟⠁⠀⠀⠀⠀⠀⠀⠀⠀⢠⣾⣿⣶⣶⠟⠁⠀⠀⠀⠀⠀⠀⠀⠀⣿⠀⠀⣾⠇⠀⠀⠀⢀⣾⣣⣾⠇⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀ +⠀⢠⣿⣿⠁⠀⠀⠀⠀⠀⠀⠀⠀⠀⢻⣿⣿⣿⠁⠀⠀⠀⠀⠀⠀⠀⠀⠀⢀⣿⠀⢠⡟⠀⠀⠀⢀⣾⣿⣿⡏⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀ +⢀⣿⣿⡇⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⢻⣿⣿⡄⢀⣀⡀⠀⠀⠀⠀⠀⠀⢸⡇⠀⣾⠇⠀⠀⣰⣿⣿⣿⠏⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀ +⢸⣿⣿⡇⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⢿⣿⣿⣿⣿⣿⣦⡀⠀⠀⠀⠀⣾⠀⣰⠟⠀⢀⣼⣿⣿⠛⠁⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀ +⢸⣿⣿⡀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠘⠿⠿⠿⠿⠿⠿⠃⠀⠀⠀⢸⣿⣶⠏⢀⣴⣿⣿⠏⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀ +⢸⣿⣿⣿⡆⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⢠⣾⣿⠃⢠⣿⣿⡿⠃⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀ +⢿⣿⣿⣿⠇⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⢠⣿⣿⢃⣴⣿⡿⠋⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀ +⠈⠛⠛⠋⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⢠⣿⣿⣧⣾⣿⣿⡇⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀ +⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⢀⣴⣿⣿⡟⢸⣿⣿⣿⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀ +⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⢀⣴⣿⣿⣿⠁⠀⠀⠈⠉⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀ +⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠘⠿⠿⠿⠛⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀ +EOH +) + +echo +echo +echo -e "\e[31m$HORSE\e[0m" +echo +echo "Welcome to Pyrois, the build system for Dark Horse Linux." +echo +echo "Stage 4, PRIME TIME - Ya made it!" +echo diff --git a/rex.project/x86_64/components/stage4/xz.bash b/rex.project/x86_64/components/stage4/xz.bash new file mode 100755 index 0000000..e26d9ec --- /dev/null +++ b/rex.project/x86_64/components/stage4/xz.bash @@ -0,0 +1,212 @@ +#!/bin/bash +# desc: +# stages, builds, installs + +# make variables persist in subprocesses for logging function +set -a + +# ---------------------------------------------------------------------- +# Configuration: +# ---------------------------------------------------------------------- +# the name of this application +APPNAME="xz" + +# the version of this application +VERSION="5.4.1" + +# ---------------------------------------------------------------------- +# Variables and functions sourced from Environment: +# ---------------------------------------------------------------------- +# assert_zero() +# Checks if $1 is 0. If non-0 value, halts the execution of the script. +# +# LOGS_ROOT +# The parent directory where logs from this project will go. +# +# TEMP_STAGE_DIR +# The parent directory of where source archives are extracted to. + +# register mode selections +ARGUMENT_LIST=( + "stage" + "build_temp" + "install_temp" + "all_temp" + "help" +) + +# modes to associate with switches +# assumes you want nothing done unless you ask for it. +MODE_STAGE=false +MODE_BUILD_TEMP=false +MODE_INSTALL_TEMP=false +MODE_ALL_TEMP=false +MODE_HELP=false + +# the file to log to +LOGFILE="${APPNAME}.log" + +# ISO 8601 variation +TIMESTAMP="$(date +%Y-%m-%d_%H:%M:%S)" + +# the path where logs are written to +# note: LOGS_ROOT is sourced from environment +LOG_DIR="${LOGS_ROOT}/${APPNAME}-${TIMESTAMP}" + +# the path where the source will be located when complete +# note: TEMP_STAGE_DIR is sourced from environment +T_SOURCE_DIR="${TEMP_STAGE_DIR}/${APPNAME}" + +# read defined arguments +opts=$(getopt \ + --longoptions "$(printf "%s," "${ARGUMENT_LIST[@]}")" \ + --name "$APPNAME" \ + --options "" \ + -- "$@" +) + +# process supplied arguments into flags that enable execution modes +eval set --$opts +while [[ $# -gt 0 ]]; do + case "$1" in + --stage) + MODE_STAGE=true + shift 1 + ;; + --build_temp) + MODE_BUILD_TEMP=true + shift 1 + ;; + --install_temp) + MODE_INSTALL_TEMP=true + shift 1 + ;; + --all_temp) + MODE_ALL_TEMP=true + shift 1 + ;; + --help) + MODE_HELP=true + shift 1 + ;; + *) + break + ;; + esac +done + +# print to stdout, print to log +logprint() { + mkdir -p "${LOG_DIR}" + echo "[$(date +%Y-%m-%d_%H:%M:%S)] [${APPNAME}] $1" \ + | tee -a "${LOG_DIR}/${LOGFILE}" +} + +# Tell the user we're alive... +logprint "Initializing the ${APPNAME} utility..." + +# when the stage mode is enabled, this will execute +mode_stage() { + logprint "Starting stage of ${APPNAME}..." + + logprint "Removing any pre-existing staging for ${APPNAME}." + rm -Rf "${T_SOURCE_DIR}"* + + logprint "Extracting ${APPNAME}-${VERSION} source archive to ${TEMP_STAGE_DIR}" + tar xf "${SOURCES_DIR}/${APPNAME}-${VERSION}.tar."* -C "${TEMP_STAGE_DIR}" + assert_zero $? + + # conditionally rename if it needs it + stat "${T_SOURCE_DIR}-"* && mv "${T_SOURCE_DIR}-"* "${T_SOURCE_DIR}" + + logprint "Staging operation complete." +} + +# when the build_pass1 mode is enabled, this will execute +mode_build_temp() { + + # patch, configure and build + logprint "Starting build of ${APPNAME}..." + + logprint "Entering stage dir." + pushd "${T_SOURCE_DIR}" + assert_zero $? + + logprint "Configuring ${APPNAME}..." + ./configure \ + --prefix=/usr \ + --disable-static \ + --docdir=/usr/share/doc/xz-5.2.5 + assert_zero $? + + logprint "Compiling..." + make + assert_zero $? + + make check + logprint "Make check exited with exit code '$?'." + + logprint "Build operation complete." +} + +mode_install_temp() { + logprint "Starting install of ${APPNAME}..." + pushd "${T_SOURCE_DIR}" + assert_zero $? + + logprint "Installing..." + make install + assert_zero $? + + logprint "Install operation complete." +} + + +mode_help() { + echo "${APPNAME} [ --stage ] [ --build_temp ] [ --install_temp ] [ --all_temp ] [ --help ]" + exit 0 +} + +if [ "$MODE_ALL_TEMP" = "true" ]; then + MODE_STAGE=true + MODE_BUILD_TEMP=true + MODE_INSTALL_TEMP=true +fi + +# if no options were selected, then show help and exit +if \ + [ "$MODE_HELP" != "true" ] && \ + [ "$MODE_STAGE" != "true" ] && \ + [ "$MODE_BUILD_TEMP" != "true" ] && \ + [ "$MODE_INSTALL_TEMP" != "true" ] +then + logprint "No option selected during execution." + mode_help +fi + +# if help was supplied at all, show help and exit +if [ "$MODE_HELP" = "true" ]; then + logprint "Help option selected. Printing options and exiting." + mode_help +fi + +if [ "$MODE_STAGE" = "true" ]; then + logprint "Staging option selected." + mode_stage + assert_zero $? +fi + +if [ "$MODE_BUILD_TEMP" = "true" ]; then + logprint "Build of ${APPNAME} selected." + mode_build_temp + assert_zero $? +fi + +if [ "$MODE_INSTALL_TEMP" = "true" ]; then + logprint "Install of ${APPNAME} selected." + mode_install_temp + assert_zero $? +fi + +logprint "Execution of ${APPNAME} completed." + diff --git a/rex.project/x86_64/components/stage4/zlib.bash b/rex.project/x86_64/components/stage4/zlib.bash new file mode 100755 index 0000000..1debc75 --- /dev/null +++ b/rex.project/x86_64/components/stage4/zlib.bash @@ -0,0 +1,214 @@ +#!/bin/bash +# desc: +# stages, builds, installs + +# make variables persist in subprocesses for logging function +set -a + +# ---------------------------------------------------------------------- +# Configuration: +# ---------------------------------------------------------------------- +# the name of this application +APPNAME="zlib" + +# the version of this application +VERSION="1.2.13" + +# ---------------------------------------------------------------------- +# Variables and functions sourced from Environment: +# ---------------------------------------------------------------------- +# assert_zero() +# Checks if $1 is 0. If non-0 value, halts the execution of the script. +# +# LOGS_ROOT +# The parent directory where logs from this project will go. +# +# TEMP_STAGE_DIR +# The parent directory of where source archives are extracted to. + +# register mode selections +ARGUMENT_LIST=( + "stage" + "build" + "install" + "all" + "help" +) + +# modes to associate with switches +# assumes you want nothing done unless you ask for it. +MODE_STAGE=false +MODE_BUILD=false +MODE_INSTALL=false +MODE_ALL=false +MODE_HELP=false + +# the file to log to +LOGFILE="${APPNAME}.log" + +# ISO 8601 variation +TIMESTAMP="$(date +%Y-%m-%d_%H:%M:%S)" + +# the path where logs are written to +# note: LOGS_ROOT is sourced from environment +LOG_DIR="${LOGS_ROOT}/${APPNAME}-${TIMESTAMP}" + +# the path where the source will be located when complete +# note: TEMP_STAGE_DIR is sourced from environment +T_SOURCE_DIR="${TEMP_STAGE_DIR}/${APPNAME}" + +# read defined arguments +opts=$(getopt \ + --longoptions "$(printf "%s," "${ARGUMENT_LIST[@]}")" \ + --name "$APPNAME" \ + --options "" \ + -- "$@" +) + +# process supplied arguments into flags that enable execution modes +eval set --$opts +while [[ $# -gt 0 ]]; do + case "$1" in + --stage) + MODE_STAGE=true + shift 1 + ;; + --build) + MODE_BUILD=true + shift 1 + ;; + --install) + MODE_INSTALL=true + shift 1 + ;; + --all) + MODE_ALL=true + shift 1 + ;; + --help) + MODE_HELP=true + shift 1 + ;; + *) + break + ;; + esac +done + +# print to stdout, print to log +logprint() { + mkdir -p "${LOG_DIR}" + echo "[$(date +%Y-%m-%d_%H:%M:%S)] [${APPNAME}] $1" \ + | tee -a "${LOG_DIR}/${LOGFILE}" +} + +# Tell the user we're alive... +logprint "Initializing the ${APPNAME} utility..." + +# when the stage mode is enabled, this will execute +mode_stage() { + logprint "Starting stage of ${APPNAME}..." + + logprint "Removing any pre-existing staging for ${APPNAME}." + rm -Rf "${T_SOURCE_DIR}"* + + logprint "Extracting ${APPNAME}-${VERSION} source archive to ${TEMP_STAGE_DIR}" + tar xf "${SOURCES_DIR}/${APPNAME}-${VERSION}.tar."* -C "${TEMP_STAGE_DIR}" + assert_zero $? + + # conditionally rename if it needs it + stat "${T_SOURCE_DIR}-"* && mv "${T_SOURCE_DIR}-"* "${T_SOURCE_DIR}" + + logprint "Staging operation complete." +} + +# when the build_pass1 mode is enabled, this will execute +mode_build() { + + # patch, configure and build + logprint "Starting build of ${APPNAME}..." + + logprint "Entering stage dir." + pushd "${T_SOURCE_DIR}" + assert_zero $? + + logprint "Configuring ${APPNAME}..." + ./configure --prefix=/usr + assert_zero $? + + logprint "Compiling..." + make + assert_zero $? + + logprint "Checking zlib" + make check + logprint "Make check completed with exit code '$?'." + + logprint "Build operation complete." +} + +mode_install() { + logprint "Starting install of ${APPNAME}..." + pushd "${T_SOURCE_DIR}" + assert_zero $? + + logprint "Installing..." + make install + assert_zero $? + + logprint "Removing unused artifacts..." + rm -fv /usr/lib/libz.a + assert_zero $? + + logprint "Install operation complete." +} + + +mode_help() { + echo "${APPNAME} [ --stage ] [ --build ] [ --install ] [ --all ] [ --help ]" + exit 1 +} + +if [ "$MODE_ALL" = "true" ]; then + MODE_STAGE=true + MODE_BUILD=true + MODE_INSTALL=true +fi + +# if no options were selected, then show help and exit +if \ + [ "$MODE_HELP" != "true" ] && \ + [ "$MODE_STAGE" != "true" ] && \ + [ "$MODE_BUILD" != "true" ] && \ + [ "$MODE_INSTALL" != "true" ] +then + logprint "No option selected during execution." + mode_help +fi + +# if help was supplied at all, show help and exit +if [ "$MODE_HELP" = "true" ]; then + logprint "Help option selected. Printing options and exiting." + mode_help +fi + +if [ "$MODE_STAGE" = "true" ]; then + logprint "Staging option selected." + mode_stage + assert_zero $? +fi + +if [ "$MODE_BUILD" = "true" ]; then + logprint "Build of ${APPNAME} selected." + mode_build + assert_zero $? +fi + +if [ "$MODE_INSTALL" = "true" ]; then + logprint "Install of ${APPNAME} selected." + mode_install + assert_zero $? +fi + +logprint "Execution of ${APPNAME} completed." + diff --git a/rex.project/x86_64/environments/stage1.env.bash b/rex.project/x86_64/environments/stage1.env.bash index 77aaaee..b68408d 100755 --- a/rex.project/x86_64/environments/stage1.env.bash +++ b/rex.project/x86_64/environments/stage1.env.bash @@ -55,7 +55,7 @@ TEMP_STAGE_DIR=${T_SYSROOT}/source_stage # from project_config SOURCES_DIR=${dir_sources} PATCHES_DIR=${dir_patches} -LOGS_ROOT=${dir_logs} +LOGS_ROOT=${dir_logs}/apps/stage1 # fail the unit in the event of a non-zero value passed # used primarily to check exit codes on previous commands diff --git a/rex.project/x86_64/environments/stage2.env.bash b/rex.project/x86_64/environments/stage2.env.bash index 251eae3..28df1f6 100755 --- a/rex.project/x86_64/environments/stage2.env.bash +++ b/rex.project/x86_64/environments/stage2.env.bash @@ -54,7 +54,7 @@ TEMP_STAGE_DIR=${T_SYSROOT}/source_stage # from project_config SOURCES_DIR=${dir_sources} PATCHES_DIR=${dir_patches} -LOGS_ROOT=${dir_logs} +LOGS_ROOT=${dir_logs}/apps/stage2 # fail the unit in the event of a non-zero value passed # used primarily to check exit codes on previous commands diff --git a/rex.project/x86_64/environments/stage3.env.bash b/rex.project/x86_64/environments/stage3.env.bash index 2b7e98e..03b40e9 100755 --- a/rex.project/x86_64/environments/stage3.env.bash +++ b/rex.project/x86_64/environments/stage3.env.bash @@ -55,7 +55,8 @@ TEMP_STAGE_DIR=/source_stage # from project_config SOURCES_DIR=/rex_embedded/stage/sources PATCHES_DIR=/rex_embedded/stage/patches -LOGS_ROOT=/rex_embedded/logs +LOGS_ROOT=/rex_embedded/logs/apps/stage3 +CONFIGS_DIR=/rex_embedded/configs # fail the unit in the event of a non-zero value passed # used primarily to check exit codes on previous commands diff --git a/rex.project/x86_64/environments/stage4.env.bash b/rex.project/x86_64/environments/stage4.env.bash new file mode 100755 index 0000000..56a97d2 --- /dev/null +++ b/rex.project/x86_64/environments/stage4.env.bash @@ -0,0 +1,71 @@ +set -a +# We now do paths relative to / since we are INSIDE $T_SYSROOT + +TERM=xterm-256color +COLORTERM=truecolor +LC_ALL=C + +function echofail() { + echo + echo "FAILED: $1" + echo + exit 1 +} + +rex_dir="/rex_embedded" + +# keeps talking about T_SYSROOT as $LFS +# wants $LFS path to be a mount +# needs to be set for any user including root + +#2.6 +# sourced from project_config +T_SYSROOT="/" +LFS=${T_SYSROOT} + +# 4.3 we skip user and group creation, it's expected to be done before +# you start if you want a different user than you're running as +# == after that, configure the rex unit for dir creation to use that user + +if [ "$(id -u)" -ne 0 ]; then + echo "Not running as root." +fi + +# 4.4 + +# The set +h command turns off bash's hash function, which affects caching of paths for executables +set +h + +# ensures newly created files and directories are only writable by their owner, but are readable and executable by anyone +umask 022 + +# sets a comptabile machine name description for use when building crosstools that isn't going to be what the host system is using +# $LFS_TGT is what LFS uses for this +T_TRIPLET=x86_64-dhl-linux-gnu + +# prevents some configure scripts from looking in the wrong place for config.site +CONFIG_SITE=/usr/share/config.site + +# 4.5 +MAKEFLAGS="-j$(nproc)" + +# where the cross-compiler gets installed ($LFS/tools) +TEMP_STAGE_DIR=/source_stage +# from project_config +SOURCES_DIR=/rex_embedded/stage/sources +PATCHES_DIR=/rex_embedded/stage/patches +LOGS_ROOT=/rex_embedded/logs/apps/stage4 +CONFIGS_DIR=/rex_embedded/configs + +# fail the unit in the event of a non-zero value passed +# used primarily to check exit codes on previous commands +# also a great convenient place to add in a "press any key to continue" +assert_zero() { + if [[ "$1" -eq 0 ]]; then + return + else + exit $1 + fi +} +ARCHLIB_DIR=/lib64 +PATH=/usr/bin:/usr/sbin diff --git a/rex.project/x86_64/plans/stage3.plan b/rex.project/x86_64/plans/stage3.plan index 590f935..0d34bf1 100644 --- a/rex.project/x86_64/plans/stage3.plan +++ b/rex.project/x86_64/plans/stage3.plan @@ -16,6 +16,11 @@ "dependencies": [ null ], "comment": "LFS 11.3-systemd-rc1 Ch. 7.6" }, + { + "name": "util-linux", + "dependencies": [ null ], + "comment": "LFS 11.3-systemd-rc1 Ch. 7.12" + }, { "name": "gettext", "dependencies": [ null ], @@ -41,11 +46,6 @@ "dependencies": [ null ], "comment": "LFS 11.3-systemd-rc1 Ch. 7.11" }, - { - "name": "util-linux", - "dependencies": [ null ], - "comment": "LFS 11.3-systemd-rc1 Ch. 7.12" - }, { "name": "cleaning up the temp system", "dependencies": [ null ], diff --git a/rex.project/x86_64/plans/stage4.plan b/rex.project/x86_64/plans/stage4.plan new file mode 100644 index 0000000..13eaef6 --- /dev/null +++ b/rex.project/x86_64/plans/stage4.plan @@ -0,0 +1,40 @@ +{ + "plan": + [ + { + "name": "welcome 4", + "dependencies": [ null ], + "comment": "greet the user" + }, + { + "name": "man pages", + "dependencies": [ null ], + "comment": "LFS 11.3-systemd-rc1 Ch. 8.3" + }, + { + "name": "iana-etc", + "dependencies": [ null ], + "comment": "LFS 11.3-systemd-rc1 Ch. 8.4" + }, + { + "name": "glibc final", + "dependencies": [ null ], + "comment": "LFS 11.3-systemd-rc1 Ch. 8.5" + }, + { + "name": "zlib", + "dependencies": [ null ], + "comment": "LFS 11.3-systemd-rc1 Ch. 8.6" + }, + { + "name": "bzip2", + "dependencies": [ null ], + "comment": "LFS 11.3-systemd-rc1 Ch. 8.7" + }, + { + "name": "xz", + "dependencies": [ null ], + "comment": "LFS 11.3-systemd-rc1 Ch. 8.8" + } + ] +} diff --git a/rex.project/x86_64/units/stage4.units b/rex.project/x86_64/units/stage4.units new file mode 100644 index 0000000..81745ff --- /dev/null +++ b/rex.project/x86_64/units/stage4.units @@ -0,0 +1,130 @@ +{ + "units": [ + { + "name": "welcome 4", + "target": "components/stage4/welcome.bash", + "is_shell_command": true, + "shell_definition": "bash", + "force_pty": true, + "set_working_directory": false, + "working_directory": "", + "rectify": false, + "rectifier": "", + "active": true, + "required": true, + "set_user_context": true, + "user": "root", + "group": "root", + "supply_environment": true, + "environment": "environments/stage4.env.bash" + }, + { + "name": "man pages", + "target": "components/stage4/man-pages.bash --all", + "is_shell_command": true, + "shell_definition": "bash", + "force_pty": true, + "set_working_directory": false, + "working_directory": "", + "rectify": false, + "rectifier": "", + "active": true, + "required": true, + "set_user_context": true, + "user": "root", + "group": "root", + "supply_environment": true, + "environment": "environments/stage4.env.bash" + }, + { + "name": "iana-etc", + "target": "components/stage4/iana-etc.bash --all", + "is_shell_command": true, + "shell_definition": "bash", + "force_pty": true, + "set_working_directory": false, + "working_directory": "", + "rectify": false, + "rectifier": "", + "active": true, + "required": true, + "set_user_context": true, + "user": "root", + "group": "root", + "supply_environment": true, + "environment": "environments/stage4.env.bash" + }, + { + "name": "glibc final", + "target": "components/stage4/glibc.bash --all", + "is_shell_command": true, + "shell_definition": "bash", + "force_pty": true, + "set_working_directory": false, + "working_directory": "", + "rectify": false, + "rectifier": "", + "active": true, + "required": true, + "set_user_context": true, + "user": "root", + "group": "root", + "supply_environment": true, + "environment": "environments/stage4.env.bash" + }, + { + "name": "zlib", + "target": "components/stage4/zlib.bash --all", + "is_shell_command": true, + "shell_definition": "bash", + "force_pty": true, + "set_working_directory": false, + "working_directory": "", + "rectify": false, + "rectifier": "", + "active": true, + "required": true, + "set_user_context": true, + "user": "root", + "group": "root", + "supply_environment": true, + "environment": "environments/stage4.env.bash" + }, + { + "name": "bzip2", + "target": "components/stage4/bzip2.bash --all", + "is_shell_command": true, + "shell_definition": "bash", + "force_pty": true, + "set_working_directory": false, + "working_directory": "", + "rectify": false, + "rectifier": "", + "active": true, + "required": true, + "set_user_context": true, + "user": "root", + "group": "root", + "supply_environment": true, + "environment": "environments/stage4.env.bash" + }, + { + "name": "xz", + "target": "components/stage4/xz.bash --all", + "is_shell_command": true, + "shell_definition": "bash", + "force_pty": true, + "set_working_directory": false, + "working_directory": "", + "rectify": false, + "rectifier": "", + "active": true, + "required": true, + "set_user_context": true, + "user": "root", + "group": "root", + "supply_environment": true, + "environment": "environments/stage4.env.bash" + } + ] +}